Micromixers available
In addition to the standard, cooled, heated and photochemical reactors, Vapourtec offer a Micromixer reactor manifold. In common with the Vapourtec family of reactors, the micromixer reactor simply plugs into the ports in the R4.
The chip reactors are housed inside a glass manifold offering excellent visibility of the reactants.
- Cooled gas is circulated around the reactor to provide temperatures from ambient to -40 °C. The gas is provided by the Vapourtec cooling module.
- The micromixer reactor can also reach temperatures up to 150 °C from heated air which is circulated around the reactor.
- Two chip reactors can be inserted into the micromixer manifold, therefore, one chip can be used for mixing the other as a residence time chip.
- The thermocouple sits directly on the reactor wall and feeds back to the heater control.
Range of microreactors
Each microchip reactor comes in a default size of 115 x 60 x 6 mm. The structure of the channels varies depending on what conditions and mixing types required.
LTF-MS – 50-1273
Mixing volume 0.2 ml
Channel size: 1 mm
0.5 – 20 ml / min / channel
With two input channels, and a short duration, this reactor is not prone to blockage
LTF-MX – 50-1268
Mixing volume 0.2 ml
Channel size: 1 mm
0.1 – 10 ml / min / channel
Two input channels, short duration, for quick mixture-intensive substances
LTF-V – 50-1272
Mixing volume 1.7 ml
Channel size: 1 mm
Single channel, reduced turbulent flow, for increased exposure time
LTF-VS – 50-1269
Mixing volume 1.1 ml
Channel size: 1 mm
Single channel, for mixture-intensive substances and increased exposure time
Reactor 1 – 40-1773
Mixing volume 1.5 ml
Channel size: 1 mm
Two input channels, for mixture-intensive substances and long exposure time
Reactor 2 – 40-1774
Mixing volume 1.0 ml
Channel size: 1 mm
0.25 ml pre-conditioning volume for both input channels
Two input channels, allow both reagents to reach reaction conditions before mixing, for mixture-intensive substances and long exposure time
Reactor 3 – 40-1775
Mixing volume 0.6 ml
Secondary mixing volume 0.25 ml
Channel size: 1 mm
0.25 ml pre-conditioning volume for both input channels
Third channel with 0.25 ml pre-conditioning for quenching agent
Three input channels, allow all three reagents reach reaction conditions before mixing, the third channel mixes after an initial 0.6 ml, for mixture-intensive and delayed/quenching substances
